Free Electrical InspectionsCount on the experts. More...
Up Front Pricing
You approve the price before we do the work. More...
Service AgreementsFor savings and peace of mind. More...
GFCI ReceptaclesProtection from electrical shocks. More...
Ceiling FansMake your heating and cooling more efficient. More...
Surge ProtectionProtect your investment. More...
Electrical UpgradesWhen your electrical needs change. More...
Lighting MaintenanceSave time, money & energy. More...
Rewiring
Electrical fires in our homes claim the lives of 485 lives each year. More...
Service & RepairSolving all your electrical problems. More...
Smoke & Carbon Monoxide DetectorsThe safety of your family is our top priority. More...
Customer ServicePrompt, professional service. More...
Electrical Panel Upgrades
Is your homes electrical panel stressed out? More...
OutletsAdd convenience. More...
Outdoor LightingGet year round safety, security & beauty. More...
Back Up GeneratorsReliable power when you need it. More...
Lighting DesignDesign with light. More...
Low Voltage WiringA smarter connection. More...
Swimming Pool & Hot Tub WiringMore...
Additions & RenovationsPlanning an addition or renovation? More...
| FAQ |
 |
 |
 |
|
What are the signs of potential electrical hazards in the home? Some things to look for: Room lights dim when the refrigerator or air conditioner kicks on; the television screen shrinks; circuit breakers frequently trip; outlets or dimmer switches seem hot to the touch. These conditions indicate that the electrical wiring in your house is overloaded. Is an old-fashioned fuse box a hazard? The short answer is no, because fuses provide the same protection against overloaded wiring as circuit breakers. However, when fuse boxes were in widespread use, most homes had only 30 or 60-ampere service. Today’s homes need at least 150 to 200-ampere service to safely supply power for major appliances. If you have a fuse box and you’ve added any large appliances over the years, it is recommended that you have your home wiring inspected to make sure it is still safe. Call Flash Electric, and we can send a qualified electrician to inspect this for you. How can I tell when an electrical outlet isn’t safe? There are three indicators of an unsafe outlet: If an outlet can no longer hold a plug snugly; if any parts of the outlet are broken; or if the outlet feels hot to the touch. If any of these conditions exist, we can replace the outlet for you. Can I add more outlets in the kitchen? Most likely, yes. However, don’t forget to install GFCI outlets in the kitchen. This is a job for a licensed electrician and we’re ready to help do it right. How long does electrical wiring last? That’s a hard question to answer, since it depends on the type of use and abuse the system has experienced over the years. If you have any doubts about your wiring, or notice some frayed or broken insulation, call Flash Electric and have a complete inspection of your home’s electrical wiring. How long do outlets and switches last? It depends on use. Electricians will tell you they see outlets more than 50 years old that still work fine, and others that are worn out after only a few years. What should I do if my lights, switches, and receptacles don't work? Check to see if the outlet is on a switch. Check and reset GFCI outlets and circuit breaker. Check light bulbs and replace, if necessary. If none of these are the problem, call Flash Electric. Why do I blow fuses or why does my circuit breaker trip? Except in the case of ground fault interrupters, which are susceptible to moisture and/or weather conditions, fuses and circuit breakers should not trip. Check to see if some type of plugged in appliance is causing the problem. What causes the lights in my house to flicker? Central air conditioning and heat pump condensers may cause a noticeable slight dimming on start up. Lights may flicker or dim due to startup of some appliances or motor driven equipment. Check with the local utility company for possible defects in supply source or for the utility switching to other utilities for supply. What is a GFCI device or breaker? GFCI stands for Ground Fault Circuit Interrupter. In layman's terms, this device protects you from electrical shock. When it senses the slightest increase in resistance resulting from ground fault, (i.e., the use of electrical devices in or near water), it trips off to protect you. What are the red and black buttons on my GFCI outlet? The black button is a test button and when pressed, it should deactivate the outlet and any other outlet fed from it - indicating a properly functioning device. The red button is the reset button that you depress to reactivate the outlet or outlets in the event of deactivation resulting from a fault. What is the difference between a breaker panel and my old fuse panel? Both devices, either breaker or fuse, are designed to trip (turn off) in the event of an electrical overload, i.e. 20 amps of electrical load on a 15 amp circuit would cause a trip. The only difference is that a breaker is mechanical and may be reset. Whereas, a fuse is one time only and must be replaced. Please Note: Modern breakers are much more efficient and offer greater levels of protection. How do I reset my breaker when it has tripped off? First, disconnect any additional devices that may have caused the breaker to overload and trip. Breakers are mechanical devices and must be turned all the way off before turning back on. Remember, this is a mechanical device, so this may require several attempts. If this fails to reset the breaker; there may be a more serious problem. Call Flash Electric at 770-77FLASH. What does it mean when my fluorescent lights are flickering or cycling on and off? Flickering may indicate impending bulb failure, minor power fluctuation, and/or improperly installed bulbs. Cycling on and off is usually a clear indication of ballast and/or bulb failure. It is recommended when replacing a ballast to replace bulbs as well. Can I hang a ceiling fan where a light is? Yes, but first you must make sure the electrical box is properly braced and rated for the weight and torque of the ceiling fan you are installing. Can I dim fluorescent lights? Yes. Dimming fluorescent requires not only a special dimmer, but also special fixtures. You cannot place a typical incandescent dimmer on existing fluorescent. I have a new home. Why does my refrigerator or freezer, located in my garage, keep going off? Unless you made provisions with the builder for a dedicated circuit, the outlets in your garage are GFCI Protected per the National Electrical Code. This device will not tolerate the additional resistance load created by refrigeration equipment. The GFCI senses there is a fault, and therefore, trips off. The only cure to this problem is to provide a dedicated, non-GFCI circuit allowable by code. Can I plug my coffee pot and toaster oven into the same kitchen counter outlet? Yes. Though, if the two loads exceed 20 amps, your breaker will sense overload, do its job, and trip off. Under this condition, you must plug one of the appliances into a different kitchen outlet on a different circuit in order to balance the load. When my air conditioner cycles on, I notice my lights blink. Is this normal? Yes. This is a common occurrence when large motor/compressor loads start. These devices cause a minor momentary voltage drop, demonstrating itself as the blinking in your lights. This has no negative effect on the electrical equipment within your house. I have surge/lightning protection on my home. Am I totally safe from lightning strikes? No. Surge/Lightning Protection only offers additional levels of protection. Nothing can guarantee completely against Mother Nature and where she chooses to strike. If I have surge/lightning protection on my main service should I use point-of-use surge plugins at my TV, stereo, computer, etc.? Yes. Main line surge is no absolute guarantee, and any additional surge protection down stream in the system offers a greater level of protection; though, nothing is absolute when it comes to the power of Mother Nature. Why does my recess can light cycle on and off since I put a larger wattage bulb in? Modern recess cans are rated for a maximum wattage bulb and are equipped with a thermal device that does not allow a bulb larger than that rating. If a larger wattage bulb is used, as the excess heat builds up, the thermal device will shut the can off until it cools. This is a safety device to protect your home against fire. If I have problems with TV or telephone wiring within the house, whom should I call? With deregulation of the utility companies in most areas of the country, the cable or telephone companies are no longer responsible for the equipment or wiring in your home. This responsibility has fallen to you and your electrical contractor. Therefore, when a problem arises, we recommend you call us. Most TV and telephone utilities will still service within your home for a substantial fee. This service, as in the past, is no longer free. I have two telephone lines in my home. When I'm on the phone and the other phone line is in use, why do I hear the other conversation in the background? This is commonly called bleed over and usually results from one of three conditions. 1. Excessively long runs of wire within the home of non-twisted pairs. 2. Loop wiring from phone station to phone station. 3. A nick in the phone wire somewhere within your residence causing a weak interconnect between phone lines. Why do the bulbs in my exterior fixture burn out so often? This is usually caused by several factors. 1. Use of non-brand named bulbs. 2. Larger wattage bulbs, which cause excessive, heat build-up shorting the life of the bulb. 3. Power Surges. My smoke detector keeps chirping. What does this mean? This could mean one of two things. 1. An intermittent chirp is probably an indication of a defective smoke detector. 2. A consistent chirp is probably an indication of a low battery condition, and the smoke detector requires a new battery. |